Ce Approval Small CO2 Fire Extinguisher Refilling Station Equipment

Ce Approval Small CO2 Fire Extinguisher Refilling Station Equipment

Merchandise description:
GFM powder filler is a new merchandise created and made by our manufacturing unit in combination with the characteristic of genuine filling with reference to the benefits of its counterparts at house and abroad. Powder is swiftly absorbed into the cylinder to be filled by vacuum jet recent. It is outfitted with T3806 excess weight display of substantial precision and MP-T printer. The filling is automatic and quantitative. The residual dust on the filter is cleared by use of the damaging force produced by vacuum. As it integrates electronics, electrical unit and machinery into one particular entity, labor intensity is lowered and operate setting improved. It is characterized by little volume, light bodyweight, reduced power usage, easy movement, easy procedure and for a longer time provider life. So it is specifically ideal for powder filling of hearth extinguisher and also ideal for other powder filling sector.

 

Fireplace extinguisher filling device
Kind Product
Powder filling equipment GFM8-2,GFM16-1,GFM16-1A,GFM16-1B
Co2 filling machine  GTM-B,GTM-D,DGTM-C
Water filling device GFM
Nitrogen fuel filling machine MDG-1.seven

Fireplace extinguisher filling device images and technical parameters particulars:
one.GFM8-two computerized fire extinguisher power filling equipment

Specifications:

General size: 1130X520X1350mm Bodyweight:200Kg

Voltage:380V or 220V      50Hz Power:.55Kw

Filling precision: 1kg<=±0.02

Filling pace:6-12Kg/min

two.GFM16-A semi automatic fire extinguisher power filling equipment

Specifications:

All round dimensions:350X800X1200mm Excess weight:110Kg

Voltage:380V or 220V Electricity:one.1KW

Filling speed: 5kg /min

Filling precision: 1kg<=±0.02

three.GTM-C fire extinguisher CO2 filling machine

 

Specs:

A.   This device require not be heated or cooled, and CO2 can be straight loaded into the fireplace extinguisher sort the big metal cylinder

B.   The CZPT force in the CO2 steel can is three~5Mpa and the filling strain is 6~10Mpa.

C.   The filling speed: 1~6Kg/min.

D.   Voltage: 380V&220V

E.    Power: 2.7KW.

F: A german plunger pump inside  it

four.NDG1.7 hearth extinguisher nitrogen filling machine

Technical specs:

Total size: 585X500X1000mm

Excess weight:30Kg

Voltage:220V

Power:100w

Filling stress:1.7Mpa
 

fire extinguisher powder filler advantage:
1. CZPT cleaning: Push the button only, the filler will cleanse thoroughly of itself. 
two. Filling repeatedly: Soon after stuffed a fireplace extinguisher, the work want not restart the powder outlet, in five CZPTs (this time can be adjusted by consumer), powder will flow out immediately. 
3. Anti-corrode: CZPT powder storage cylinder. 
4. Two type powder outlet: Powder outlet 1# helps make filling perform considerably simple, it avoids to squander time on goal the powder outlet to fireplace extinguisher cylinder inlet. 
five. Powder recycles operate. 
fireplace extinguisher powder filler Function: 
one. CZPT control total process: 
Sucking powder from warehouse or other fireplace extinguisher, automated filling, cease and cleaning of filter. 
2. Precision: 
The filler is equipped with T3806 digital scale of great precision, constituting the controller with electric powered factors. Whether you fill a little cylinder of . 5 kg or a large extinguisher of 35 kg, all you have to do is just to set up the weight to be stuffed on the electronic scale. When the set-up bodyweight is crammed, the device will end of itself 
three. Quickness: 
A lot more than 8kg for every minute. 
twenty five-three- CZPTs for 4kg hearth extinguisher 
forty five-fifty CZPTs for 8kg fireplace extinguisher 
Filling variety: Over . 5kg 
4. Economy 
Only one worker is essential to complete complete filling motion, cylinder motion.

five. CZPT Cleaning 
The filler capabilities to clean routinely. It will thoroughly clean after after filling one particular extinguisher without the use of handbook cleaning filter. An automatic change for cleansing is set independently. For cleansing you have to press the button only and the filler will clear completely of alone.

six. Air pollution–free 
The filler is put in the filling shop although the powder is saved in the warehouse, separating the powder supply from the workshop and fully staying away from the air pollution by dust. Making use of the filler, powder can be efficiently stuffed into the fire extinguisher.

Automatic filling devices for the dry chemical fire extinguishers is a new product designed and created by our factory in mix with the attribute of genuine filling with reference to the rewards of its counterparts at home and overseas. Powder is swiftly absorbed into the cylinder to be crammed by vacuum jet existing. It is equipped with T3806 fat display of higher precision and MP-T printer. The filling is computerized and quantitative. The residual dust on the filter is cleared by use of the negative pressure developed by vacuum. As it integrates electronics, electrical system and equipment into one particular entity, labor depth is decreased and function atmosphere enhanced. It is characterised by little quantity, light-weight weight, decrease vitality consumption, effortless movement, basic procedure and longer services existence.

Ce Approval Small CO2 Fire Extinguisher Refilling Station Equipment